top of page


Thermal Transfer 6"+ print & apply technology for products, cases  & pallets


Print width up to 162 mm (6.37 inches) makes the Evolabel T63 thermal transfer printer suitable for pallet and box labeling, where large labels carrying a lot of data often are used.

The T63 prints up to A5 format labels and meets the GS1 standards for pallet labeling. Evolabel offer unique and safe solutions for 1, 2 or 3 side pallet labeling. The Evolabel T63 handle both thermal transfer technology as well as direct thermal technology.

  • Crisp, clear coding on glass, even at high line speeds, with VisiCode®, a unique set of parameters


Technical Specifications

  • Print technology: Thermal transfer (does also handle Direct thermal labels)

  • Maximum print width: 162 mm (6.37 inches)

  • Maximum print length: 350 mm

  • Label size (W x L): 30x20 mm to 178x400 mm

       (applicator specific)

  • Maximum media width: 180 mm

  • Printable area: 100% thanks to automatic rewind

       of each label

  • Applicators: BlowVAC, Belt, Tamp, eTamp, Wipe G2,      Wipe90 G2, QuickTamp, FlexWipe Pallet Labeling System

  • Resolution: 300 dpi

  • Print speed: Printing speed Default 160 mm/s

       (max. 200 mm/s)

  • Historically compensated print function:

       Built into the control unit

  • Heat compensated print function: Built into the control unit

  • Fonts: Truetype, Unicode

  • Barcodes: EAN-13, EAN-8, CODE128, GS1-128, GS1-Databar   (+ Exp, Limit, Stack, Stack Omni, Exp Stack), Interleaved 2 of 5, UPCA

  • 2D codes: Datamatrix, PDF-417, QR code

  • External dimensions, excl. applicator (LxWxH): 440x420x485 mm

  • Label roll outer diameter (max): 12" / 300 mm

  • Label roll core diameter: 3" / 76 mm

  • Label roll winding: Labels on the outside of the roll

  • Ribbon roll outer diameter (max): 3,4" / 85 mm

  • Ribbon roll core diameter: 1" / 25 mm

  • Ribbon ink side: Inside

  • Communication: Ethernet/LAN, USB, CANopen, RS-232

  • Operating temperature: +5°C to +40°C (down to -28°C provided that the power is always switched on)

  • Humidity: 20 to 85%, non-condensing

  • Mains supply: 110/240 VAC, 50/60 Hz

  • Air supply: 6-10 bar, clean and dry




1. Touch screen

    From the 7”, 12", 15" touch screen options, the operator can easily change products and settings.

2. Status beacon

    The status tower provides an easy way to monitor the machine status from a distance.

3. Control Panel

    From the Control panel the operator can easily stop, reset and start the printer.

4. Trigger sensor

    Evolabel offers a reflecting PNP trigger sensor from SICK, which fits most applications. The         

    machine can interface to any 24V PNP trigger from other suppliers.

5. Mounting kit

    This is the standard robust stainless steel mounting kit from Evolabel. It will fit most applications. It

    is intended to be used with the pillar stand (6).

6. Pillar stand

    This pillar stand of anodized aluminium can either be mounted directly on the floor or onto the

    stand foot (7). The pillar stand is also available with motorized height adjustment.

7. Stand foot

    The stand foot is a robust powder coated aluminium foot with wheels and adjustable machine feet

    covered with rubber for good positional stability.



Video Library

Evolabel Videos

Product Line


Testimonial Brochure

Related Products
T43 with hand.jpg
T63 printer.jpg
bottom of page