belt applicator 4.jpg
evolabel-TM-logo-white-on-black.png
belt applicator 2.jpg

Belt Applicator

Evolabel Belt applicator applies labels with high speed and precision on the base or on top of packages.

A vacuum belt transports the label from the printer to the product. Running the belt at the same speed as the conveyor gives very accurate label positioning also on extremely light products.

The same applicator can handle various label sizes from 30x30 mm to 118x150 mm.

Fast and precise base pack labeling

belt applicator 3.jpg

The Evolabel belt applicator in combination with the D43 printer is with its compact size and accurate labeling, perfect for product labeling from below.

Depending on label size, the capacity is as high as up to 120 packages per minute.

Sliced cheese - Arla Foods

belt applicator 4.jpg

The Evolabel belt applicator in combination with the D43 printer is with its compact size and accurate labeling, perfect for product labeling from below.

Depending on label size, the capacity is as high as up to 120 packages per minute.

evolabel-TM-logo-Gray.png

Technical Specifications

Evolabel Belt applicator applies labels with high speed and precision from above, from below or from the side. A vacuum belt transports the label from the printer to the product.

The vacuum belt runs at the same speed as the conveyor and is thus not limited to the print speed of the printer. This gives very accurate label positioning also on extremely light products. Provided the packages has a well defined edge to trig on, the label accuracy is in the area of +/- 0.5 mm.

Several independent vacuum ejectors are integrated in the applicator. This allow the same applicator to handle various label sizes, all from 30x30 mm to 118x150 mm.

The Evolabel belt applicator in combination with the D43 printer is with its compact size and accurate labeling, perfect for product labeling from below. Depending on label size, the capacity is in combination with the D43 high-speed app, as high as up to 120 packages per minute.

Evolabel supply complete marking stations for secure integration in the production.To give the operator an easy and ergonomic solution for changing label roll, the D43 belt can be mounted on a pneumatic floor stand and holder with swing out function.

 

The mechanical, electrical and pneumatic interface between the Evolabel applicators and printers are all the same plug-and-play standard.

  • Part number: A100261

  • Suitable printer models: D43, T43, (T63 with belt ext)

  • Minimum label size: 30x30 mm

  • Maximum label size (WxL): 118x150 mm

  • Maximum apply distance: 5 mm

  • Max belt speed: 95 m/min

  • Air supply: 6 bar, clean and dry

  • Communication: CANopen

  • Accessories: Belt extension - for labels longer than 150 mm the Belt extension is required

Evolabel Belt Applicator Video

Related Products
T43-1.jpg
T43 with hand.jpg
T63 printer.jpg
flexwipe4.jpg