top of page
belt applicator 4.jpg
evolabel-TM-logo-white-on-black.png
blow 1.jpg

Blow Applicator

A unique air-knife apply the label with good precision to the product without touching it. The apply distance can be as long as up to 100 mm.

No moving parts gives very high speed – with the standard printer up to 90 labels/min with dynamic data. With optional high-speed printer version, the capacity is up to 180 labels/minute. The same applicator can handle label sizes from 35x35 mm to 100x100 mm.

An easy solution for flexible production!

Easy Access

Blow_headOpen.jpg

When changing from one label length to another, the air knife position is easy to set with a thumb screw. This is easy even in a dark environment with the built in LED that lights up inside the applicator.

Bakery – Pågen

Hono bakery blow label2.jpg

The D43 Blow is used by the large Swedish bakery Pågen for date labeling the large production of their famous "Hönökaka"

evolabel-TM-logo-Gray.png

Blow Applicator Technical Specifications

Evolabel Blow applicator is developed with ease of use and reliability in focus. It works with a fan holding the label and an air knife blowing the label to the product. The Blow applicator handles label sizes from 35x35 mm up to 100x100 mm.

The Blow applicator is designed for print and apply labels without touching the product that is to be labeled. It can handle both top- and side- labeling applications.

The Blow applicator is mounted on two arms on the printer, that lifts the applicator out of the way when changing paper. It ha also one tube for compressed air and one CAN-cable for the electrical interface, then it is ready to go!

  • Part number: A100018

  • Suitable printer models: D43

  • Minimum label size: 35x35 mm

  • Maximum label size (WxL): 100x100 mm

  • Label apply technology: Compressed air, linear cylinder

  • Maximum apply distance: 100 mm (depending on label size

  • Apply speed: Up to 120 labels/min

  • Air supply: 6 bar, clean and dry

  • Surrounding temperature (operation): +5°C to +40°C

  • Communication: CANopen

  • Humidity: 20 to 85%

  • External dimensions (WxHxD): 170 x 70 x 100 mm

Related Products
T43-1.jpg
T43 with hand.jpg
T63 printer.jpg
flexwipe4.jpg
bottom of page